The SmartGen 3.1 can transmit all the basic RDS information plus, at your option: decoder information, music/speech flags, PS and radio text scrolling options, a fully digital synthesis of the RDS signal, and two types of operating modes – Loop-through & Side-chain.

The USB connectivity makes the programming of the non-volatile memory very simple - a dedicated and intuitive Windows® interface has been included on the CD-ROM, which comes with the SmartGen 3.1 encoder. After completing the programming procedure, the unit can be disconnected and re-installed at the transmitter site. Using the SmartGen Basic RDS/RBDS Encoders Manager, all the RDS programming information can be saved as a file before, after, or instead of sending the information to the encoder. This could be very useful when various programming segments throughout the broadcast day have program-specific RDS settings or messages, or for changing advertising or station promos at random.

• Very Attractive Price
• Very Good Price-Performance Ratio
• PS & Radio Text Scrolling Options
• Fully Digital Synthesis of RDS signal
• MPX Loopthrough & Sidechain Modes

• Internal or external Pilot / MPX Synchronisation
• Very Intuitive Windows Configuration Software
• Proved and reliable hardware for 24/7/365 operating
• Built-in dedicated 19kHz source for internal sync
• Works with any FM exciter and stereo generator

• Supports both RDS & RBDS standards
• Easy Installation and Setup
• USB Programming Interfaces
• Built-in failsafe bypass relay
• 19" Case for high RF immunity

SmartGen 3.1 Encoder is a quick and inexpensive way to have an RDS/RBDS included. The SmartGen 3.1 is able to transmit basic RDS information such as the Program Service name(PS), Program Identification(PI), Alternative Frequencies(AF), Program Type(PTY). Decoder Information and Music / Speech flag are also supported. USB connectivity makes it easy to program the non-volatile memory using any PC and the supplied Windows® software. After programming, the unit should be disconnected and re-installed on the transmitter site. Though it is not capable of "dynamic" messaging of the song titles, SmartGen 3.1 will identify your station by format and will display your station's "street name", continuously transmitting any station promo or advertising messages to your listeners.

PROGRAMMING SOFTWARE:

Based on our more than 15 years of experience in the RDS field, the SmartGen Basic RDS/RBDS Encoders Manager was developed as a dedicated software for full management of our Basic RDS Encoders range as regards to the latest updates of the RDS/RBDS Standards.

• Are DEVA’s RDS/RBDS encoders capable to display artist and song information on the listeners’ radios?
  RDS/RBDS is one of the core competencies of DEVA. Thus, all encoders can display artist and title information on the receivers.
• Can DEVA’s SmartGen Encoders cope with the US RBDS system?
  Yes, all DEVA’s RDS Encoders are 100% compatible with the US RBDS.
• I need to add an RBDS/RDS services to each of the FM Stations that I own. How can I do that?
  In order for an RDS presence to each station to be added, you would need the following equipment - one basic RDS/RBDS encoder per transmitter (SmartGen Micro or SmartGen 3.1) for static RDS/RBDS services, an advanced encoder (SmartGen Mini, SmartGen 4.1, SmartGen 5.0, SmartGen 6.0) and associated data link for dynamic RDS/RBDS services.
• How should I properly connect/install my DEVA RDS/RBDS Encoder?
  Usually the encoder is connected between the stereo generator (if one is used) and the FM exciter (RF modulator). Since some FM exciters, have a separate input for "RDS" or "SUBCARRIERS", the encoder could also be connected there. In case the Studio Transmitter Links (STLs) carry a composite (multiplex) signal, the encoder can also be connected at the studio.
• My FM station is Mono. Will the encoder generate a 57kHz subcarrier without reference to the pilot tone?
  If a valid synchronization signal is not present (no signal or a signal out of the 19 kHz ±2Hz range), DEVA’s encoder will switch automatically to an internal reference.
• Are DEVA’s encoders compatible with the UECP protocol?
  All DEVA Encoders, except for SmartGen Micro and SmartGen 3.1, are fully compliant with EBU SPB490 Ver.7.05. (UECP stands for Universal Encoder Communication Protocol for RDS.)
• My station’s name is longer than 8 characters. What can I do?
  As defined in the RDS IEC 62106 and RBDS standards, the PS can be up to eight characters in length (including spaces) and can be as simple as the station’s call letters: KWOW or KWOW FM, or a slogan: NEWSTALK or LIVE 95. Any name longer than 8 characters should be shortened to suit that requirement (see "What is Dynamic PS").
• What is Dynamic PS? Can I display longer messages using PS text?
  The 'Dynamic' PS, allows longer messages to be displayed. This function is available on all DEVA encoders. As the dynamic PS is strictly forbidden in some countries, we recommend you to check your local regulations prior to using this function. For further information, refer to the RDS Standard.
• Are there any differences between PTY in RDS and PTY in RBDS?
  The Program type (PTY) is an identification number that is being transmitted with each program item. It is intended to specify the current Program Type. The RDS PTY codes are defined by the CENELEC standard, the PTY codes for the U.S version (RBDS) are defined in the NRSC 4-B standard, available at www.nrscstandards.org. Below you will find a list with the available codes.
  

  PTY code	RDS Program type	RBDS Program type
  0	None	None
  1	News	News
  2	Current Affairs	Information
  3	Information	Sports
  4	Sport	Talk
  5	Education	Rock
  6	Drama	Classic Rock
  7	Culture	Adult Hits
  8	Science	Soft Rock
  9	Varied	Top 40
  10	Pop Music	Country
  11	Rock Music	Oldies
  12	Easy Listening	Soft
  13	Light Classical	Nostalgia
  14	Serious Classical	Jazz
  15	Other Music	Classical
  16	Weather	Rhythm and Blues
  17	Finance	Soft R & B
  18	Children's Progs	Foreign Language
  19	Social Affairs	Religious Music
  20	Religion	Religious Talk
  21	Phone In	Personality
  22	Travel	Public
  23	Leisure	College
  24	Jazz Music	Unassigned
  25	Country Music	Unassigned
  26	National Music	Unassigned
  27	Oldies Music	Unassigned
  28	Folk Music	Unassigned
  29	Documentary	Weather
  30	Alarm Test	Emergency Test
  31	Alarm	Emergency
• Are DEVA encoders digital?
  The RDS/RBDS encoders’ signals are generated digitally. Which means that the signals are constructed mathematically using DSP and then converted by a D/A converter into the analog form.

• User Manual

  • • SmartGen 3.1 User Manual
  • • SmartGen 3.1 User Manual (Russian)
  • • SmartGen 3.1 Manual de Usuario (Español)

• Quick User Guide

  • • SmartGen 3.1 Quick User Guide

• Brochure

  • • SmartGen 3.1 Brochure

• Software

  • • SmartGen Basic Encoders Manager 1.0.3.17
  • • DEVA Bootloader 2.0.0.2103

• Firmware

  • • SmartGen 3.1 Firmware Update Manual
  • • SmartGen 3.1 Firmware 1.4.1402

• Images

  • • Images